Installation Guide - Page 5

Written by Administrator

Sunday, 28 December 2008 08:58

Article Index Installation Guide Page 2 Page 3 Page 4 Page 5 Page 6 All Pages Page 5 of 6 Slow Speed Host IP: This setting should be left blank if you are only using one host.  Do not enter the same information as your high speed host, or you will end up with two sets of listen buttons, with no real reason for the second set.   If you are using two hosts, enter the address for your second host here, just as you did above for your first host. Slow Speed Host Port:  Once again, if you are only using one host, you should leave this setting blank.  If you are using two hosts, enter the port number used on the second host here. Windows Media Fast Host:  If you are using a Windows Media Mount Point, you would enter your Fast Host mount point here.  If you are not using one, or do not know, leave this setting blank, and the module will generate a shoutcast mountpoint automatically.  Examples of mount points: http://www.host.com/mountpoint mms://www.host.com/mountpoint rtsp://www.host.com/mountpoint http//www.host.com/mystation.aspx Windows Media Slow Host: As above, this would be the Windows Media Mount Point for your secondary server.  If you are only using one server, leave this setting blank. High Speed: This is the text that will appear immediately above the listen buttons for your High Speed Host and Port listed above.  This can be changed to any descriptive text for the host.  For example, on the demo site, this has been changed to Primary Server. Slow Speed:  This is the text that will appear immediately above the second set of listen buttons.  On the demo site, this has been set to Backup Server. Currently Playing:  If you have enabled the display of the current song, this text will appear immediately before the song.  On the demo site, this is set to Now on Air:.  Note that the colon (:) is included as part of the text here.  It could easily be changed to any other symbol desired such as a dash (-) or even omitted completely. Show Station Name: Disabled by default.  If enabled, the name of your station, or whatever text was entered in the "Station Name" field above, will be displayed inside the module box. Show Current Song: Disabled by default.  If enabled, this will show the text entered above in the "Currently Playing" field, followed by the song and artist.  If the server host or individual broadcaster has disabled the sending of artist and song information, this feature will not work.  Show 3D Buttons:  Disabled by default.  If enabled, the module will use 3D versions of the 4 media buttons instead of the default 2D graphics. << Prev - Next >>

Last Updated ( Sunday, 28 December 2008 11:18 )